verschiedenes

    E-Mail von: Reiner.Ankenbrand@gmx.de
    Problem mit: anderes, nicht angezeigt:
    Betriebssystem: winme
    Hallo
    Ich möchte mp3 als Audio CD brennen.
    Mit meinem Brennprogramm Nero komme ich aber nur bis 4% bzw bis zum Lead in. (Wird glaub ich auch nicht geschrieben)
    Dann erscheint folgende Meldung:
    File Writer.cpp, Line 248 Einschalten, Reset oder Bus-Reset aufgetreten
    Früher lief alles Problemlos
    Win ME
    Athlon 1000 MHz
    256MB
    Rekorder: <LG CD-RW CED-8080B> ist ALDI Brenner 11/2000 und wird als HP Brenner (ist er aber nicht ) verkauft.
    Nero Version: 5.0.0.3
    Was läuft da falsch, was kann ich tun.
    Nero wurde neu installiert und ME drüber installiert.
    Danke für Eure Hilfe
    Reiner
    --------------------------------------------------
    Nerolog datei
    Windows 98 4.90
    WinAspi: File Wnaspi32.dll: Ver=1, 0, 0, 0, size=36864 bytes, created 08.06.2000 17:00:00
    Nero Version: 5.0.0.3
    Rekorder: <LG CD-RW CED-8080B> Version: 1.08 - HA 1 TA 1 - 5.0.0.3
    Adapter-Treiber: <ESDI_506> HA 1
    Drive buffer : 2048kB
    CD-ROM: <LITEON CD-ROM LTN525> Version: KL1A - HA 0 TA 1
    Adapter-Treiber: <ESDI_506> HA 0
    LITEON CD-ROM LTN525 (Target 1, L:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    LG CD-RW CED-8080B (Target 1, M:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 34603008 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 255MB (261560kB)
    Free physical memory: 0MB (320kB)
    Memory in use : 65 %
    Uncached PFiles: 0xFF
    Wizard: Off
    Audio-CD
    23.11.2000
    18:07:31 #1 CDADOC -1 File Cdadoc.cpp, Line 958
    Audio item log info:
    Audio document burn settings:
    =============================
    Burn mode: DAO,
    CD Text: On,
    Cache disk or network files: No,
    Cache small files: No,
    Cache files smaller than 131072 bytes.
    List of audio tracks:
    =====================
    Total size: 75:31.21

    18:07:31 #2 Text 0 File BusArbiter.cpp, Line 82
    bus arbitration: bus type category
    SCSI 0
    unknown 1
    other 2
    IDE 3
    drives from category 1 and 3 competition level 1
    stall writers at 95%, reactivate at 70%

    18:07:31 #3 Text 0 File Reader.cpp, Line 75
    Reader running

    18:07:31 #4 Text 0 File ThreadedTransferInterface.cpp, Line 622
    Setup items (original item values)
    0: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 31887 (31887) = #31887
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    1: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 76406 (76406) = #76406
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    2: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 23151 (23151) = #23151
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    3: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 33237 (33237) = #33237
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    4: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 33592 (33592) = #33592
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    5: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 20295 (20295) = #20295
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    6: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 28792 (28792) = #28792
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    7: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 17287 (17287) = #17287
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    8: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 20935 (20935) = #20935
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    9: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 25246 (25246) = #25246
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    10: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 14098 (14098) = #14098
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    11: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 13120 (13120) = #13120
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    --------------------------------------------------------------

    18:07:31 #5 Text 0 File Writer.cpp, Line 87
    Writer LG CD-RW CED-8080B running

    18:07:31 #6 SCSI -1080 File Cdrdrv.cpp, Line 1093
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0748FD60
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x00
    CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x3A 0x00

    18:07:31 #7 Text 0 File BusArbiter.cpp, Line 821
    Thu Nov 23 18:07:31 2000
    LG CD-RW CED-8080B: Register
    arbitration enabled
    n. category bus drive writer name
    0. 2 1 1 yes LG CD-RW CED-8080B
    i
    r

    18:07:47 #8 Text 0 File ThreadedTransferInterface.cpp, Line 754
    Prepare recorder LG CD-RW CED-8080B for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Close CD
    Tracks 1 to 12:
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 0 352800 75351024
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 75351024 75703824 255410736
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 255410736 255763536 310214688
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 310214688 310567488 388740912
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 388740912 389093712 468102096
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 468102096 468454896 516188736
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 516188736 516541536 584260320
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 584260320 584613120 625272144
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 625272144 625624944 674864064
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 674864064 675216864 734595456
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 734595456 734948256 768106752
    TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 768106752 768459552 799317792

    18:07:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 622
    Setup items (after recorder preparation)
    0: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 31887 (31887) = #31887
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 31887 blocks [LG CD-RW CED-8080B]
    1: TRM_AUDIO_NOPRE (yyy).mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 76406 (76406) = #76406
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 76406 blocks [LG CD-RW CED-8080B]
    2: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 23151 (23151) = #23151
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 23151 blocks [LG CD-RW CED-8080B]
    3: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 33237 (33237) = #33237
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 33237 blocks [LG CD-RW CED-8080B]
    4: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 33592 (33592) = #33592
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 33592 blocks [LG CD-RW CED-8080B]
    5: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 20295 (20295) = #20295
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20295 blocks [LG CD-RW CED-8080B]
    6: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 28792 (28792) = #28792
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 28792 blocks [LG CD-RW CED-8080B]
    7: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 17287 (17287) = #17287
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17287 blocks [LG CD-RW CED-8080B]
    8: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 20935 (20935) = #20935
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 20935 blocks [LG CD-RW CED-8080B]
    9: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 25246 (25246) = #25246
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 25246 blocks [LG CD-RW CED-8080B]
    10: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 14098 (14098) = #14098
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14098 blocks [LG CD-RW CED-8080B]
    11: TRM_AUDIO_NOPRE (yyy.mp3)
    2 indices, index0 (150) not provided
    original CD pos #0 + 13120 (13120) = #13120
    relocatable, CD pos for caching/writing not required/not required, no patch infos
    -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13120 blocks [LG CD-RW CED-8080B]
    --------------------------------------------------------------

    18:07:47 #10 Phase 32 File dlgbrnst.cpp, Line 1147
    Start der Simulation mit 8x (1200 KB/s)

    18:07:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0

    18:07:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #32037

    18:07:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 2 (relocatable, no CD pos, no patch infos, orig at #0): write at #108593

    18:07:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 3 (relocatable, no CD pos, no patch infos, orig at #0): write at #131894

    18:07:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 4 (relocatable, no CD pos, no patch infos, orig at #0): write at #165281

    18:07:47 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 5 (relocatable, no CD pos, no patch infos, orig at #0): write at #199023

    18:07:47 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 6 (relocatable, no CD pos, no patch infos, orig at #0): write at #219468

    18:07:47 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 7 (relocatable, no CD pos, no patch infos, orig at #0): write at #248410

    18:07:47 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 8 (relocatable, no CD pos, no patch infos, orig at #0): write at #265847

    18:07:47 #20 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 9 (relocatable, no CD pos, no patch infos, orig at #0): write at #286932

    18:07:47 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 10 (relocatable, no CD pos, no patch infos, orig at #0): write at #312328

    18:07:47 #22 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    Verifying CD position of item 11 (relocatable, no CD pos, no patch infos, orig at #0): write at #326576

    18:07:47 #23 Text 0 File BusArbiter.cpp, Line 821
    Thu Nov 23 18:07:47 2000
    READ: Register
    arbitration enabled
    n. category bus drive writer name
    0. 2 1 1 yes LG CD-RW CED-8080B
    1. 1 -1 -1 no READ
    i i
    r r

    18:10:50 #24 SCSI -1114 File Cdrdrv.cpp, Line 1251
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x028146F4
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    Sense Code: 0x29
    Sense Qual: 0x00
    CDB Data: 0xAA 0x00 0xFF 0xFF 0xD4 0x2B 0x00 0x00 0x02 0x76 0x00 0x00
    Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x29 0x00

    18:10:50 #25 mmc 10496 File Writer.cpp, Line 248
    Einschalten, Reset oder Bus-Reset aufgetreten

    18:10:50 #26 Text 0 File ThreadedTransfer.cpp, Line 211
    all writers idle, stopping conversion

    18:10:51 #27 Text 0 File ThreadedTransfer.cpp, Line 205
    conversion idle, stopping reader

    18:10:51 #28 SCSI -1119 File Cdrdrv.cpp, Line 1093
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x09
    Sense Qual: 0x00
    CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x09 0x00

    18:10:51 #29 Phase 34 File dlgbrnst.cpp, Line 1147
    Simulation nicht erfolgreich mit 8x (1200 KB/s)

    18:10:51 #30 Text 0 File Scsicmd.cpp, Line 260
    SCSI not using temporary buffers

    18:10:51 #31 Text 0 File Scsicmd.cpp, Line 283
    10 out of 10 temporary buffers allocated

    18:10:51 #32 Text 0 File WinNeroThreads.cpp, Line 909
    Thread priorities:
    Pri. name -> class / level
    0. Idle -> 32 / -15 = default
    1. Background -> 32 / -2 = default
    2. Normal -> 32 / 0 = default
    3. HighIdle -> 128 / -1 = default
    4. High -> 128 / 0 = default
    5. Higher -> 128 / 1 = default
    6. Realtime -> 128 / 2 = default

    Existing drivers:
    File IoSubSysSCSI1HLP.VXD: Ver=4.90.3000, size=19278 bytes, created 08.06.2000 17:00:00
    File IoSubsysNEROCD95.VXD: Ver=4, 0, 0, 8, size=30887 bytes, created 25.04.2000 16:52:56
    File PTUDF.VXD: Ver=Version 1.3.152, size=67731 bytes, created 14.03.2000 20:08:54
    File IoSubsysPTUDFDR.VXD: Ver=1.3.152, size=37533 bytes, created 14.03.2000 20:09:46
    File PTUDFAPP.EXE: Ver=1, 3, 0, 152, size=266240 bytes, created 14.03.2000 23:40:32
    File IoSubsysCDFS.VXD: Ver=4.90.3000, size=59141 bytes, created 08.06.2000 17:00:00

    Hallo Reiner,
    das Problem tritt in letzter Zeit immer häufiger auf, aber nur in Verbindung
    mit Win ME
    "File Writer.cpp, Line 248 Einschalten, Reset oder Bus-Reset aufgetreten"
    deudet daraufhin, dass Nero ein Problem hat, hast Du mal bei Nero gecheckt,
    ob die ein Bugfix oder Patch für Win ME haben ???
    Ansonsten kümmern wir uns darum, melde Dich Doch einfach noch mal...
    Bye AOW
    Frage : Hat die PC-Welt etwas gegen die PC-Special ?
    Mehr Infos unter: http://www.pc-special.de/index/aboutus_presse_pcwelt.php3
    _______________________________________________________________________
    Webmaster of http://www.pc-special.de/
    ...auch dir kann geholfen werden...
    Helpline - Newslettersystem - EMailForum - Forum - Webmastertools
    ________________________________________________________________________
    adconsys AG
    EMail:
    Informatikstudent an der HTWK-Leipzig
    EMail:
    ________________________________________________________________________
    -----Ursprüngliche Nachricht-----
    Von: <Reiner.Ankenbrand@gmx.de>
    An: <hotline@pc-special.de>
    Gesendet: Freitag, 24. November 2000 00:44
    Betreff: anderes, nicht angezeigt:
    > E-Mail von: Reiner.Ankenbrand@gmx.de
    >
    > Problem mit: anderes, nicht angezeigt:
    >
    > Betriebssystem: winme
    >
    > Hallo
    > Ich möchte mp3 als Audio CD brennen.
    > Mit meinem Brennprogramm Nero komme ich aber nur bis 4% bzw bis zum Lead
    in. (Wird glaub ich auch nicht geschrieben)
    > Dann erscheint folgende Meldung:
    > File Writer.cpp, Line 248 Einschalten, Reset oder Bus-Reset aufgetreten
    >
    > Früher lief alles Problemlos
    >
    > Win ME
    > Athlon 1000 MHz
    > 256MB
    > Rekorder: <LG CD-RW CED-8080B> ist ALDI Brenner 11/2000 und
    wird als HP Brenner (ist er aber nicht ) verkauft.
    > Nero Version: 5.0.0.3
    >
    >
    > Was läuft da falsch, was kann ich tun.
    > Nero wurde neu installiert und ME drüber installiert.
    > Danke für Eure Hilfe
    > Reiner
    >
    >
    > --------------------------------------------------
    >
    >
    > Nerolog datei
    >
    > Windows 98 4.90
    > WinAspi: File Wnaspi32.dll: Ver=1, 0, 0, 0, size=36864 bytes, created
    08.06.2000 17:00:00
    > Nero Version: 5.0.0.3
    > Rekorder: <LG CD-RW CED-8080B> Version: 1.08 - HA 1 TA
    1 - 5.0.0.3
    > Adapter-Treiber: <ESDI_506> HA 1
    > Drive buffer : 2048kB
    > CD-ROM: <LITEON CD-ROM LTN525> Version: KL1A - HA 0 TA 1
    > Adapter-Treiber: <ESDI_506> HA 0
    > LITEON CD-ROM LTN525 (Target 1, L:): Autoinsert Off, DMA On, Disconnect
    On, SyncDataXfer Off
    > LG CD-RW CED-8080B (Target 1, M:): Autoinsert Off, DMA On, Disconnect On,
    SyncDataXfer Off
    > CmdQueuing : 1
    > CmdNotification: 2
    > WriteBufferSize: 34603008 (0) Byte
    > ShowDrvBufStat : 0
    > EraseSpeed : 0
    > BUFE : 0
    > Physical memory : 255MB (261560kB)
    > Free physical memory: 0MB (320kB)
    > Memory in use : 65 %
    > Uncached PFiles: 0xFF
    > Wizard: Off
    >
    > Audio-CD
    > 23.11.2000
    >
    > 18:07:31 #1 CDADOC -1 File Cdadoc.cpp, Line 958
    > Audio item log info:
    > Audio document burn settings:
    > =============================
    > Burn mode: DAO,
    > CD Text: On,
    > Cache disk or network files: No,
    > Cache small files: No,
    > Cache files smaller than 131072 bytes.
    > List of audio tracks:
    > =====================
    >
    > Total size: 75:31.21
    >
    > 18:07:31 #2 Text 0 File BusArbiter.cpp, Line 82
    > bus arbitration: bus type category
    > SCSI 0
    > unknown 1
    > other 2
    > IDE 3
    > drives from category 1 and 3 competition level 1
    > stall writers at 95%, reactivate at 70%
    >
    > 18:07:31 #3 Text 0 File Reader.cpp, Line 75
    > Reader running
    >
    > 18:07:31 #4 Text 0 File ThreadedTransferInterface.cpp, Line 622
    > Setup items (original item values)
    > 0: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 31887 (31887) = #31887
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 1: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 76406 (76406) = #76406
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 2: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 23151 (23151) = #23151
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 3: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 33237 (33237) = #33237
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 4: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 33592 (33592) = #33592
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 5: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 20295 (20295) = #20295
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 6: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 28792 (28792) = #28792
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 7: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 17287 (17287) = #17287
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 8: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 20935 (20935) = #20935
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 9: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 25246 (25246) = #25246
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 10: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 14098 (14098) = #14098
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > 11: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 13120 (13120) = #13120
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > --------------------------------------------------------------
    >
    > 18:07:31 #5 Text 0 File Writer.cpp, Line 87
    > Writer LG CD-RW CED-8080B running
    >
    > 18:07:31 #6 SCSI -1080 File Cdrdrv.cpp, Line 1093
    > SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0748FD60
    > Status: 0x04 (0x01, SCSI_ERR)
    > HA-Status 0x00 (0x00, OK)
    > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    > Sense Key: 0x02 (KEY_NOT_READY)
    > Sense Code: 0x3A
    > Sense Qual: 0x00
    > CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00
    > Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    > 0x00 0x00 0x00 0x00 0x3A 0x00
    >
    > 18:07:31 #7 Text 0 File BusArbiter.cpp, Line 821
    > Thu Nov 23 18:07:31 2000
    > LG CD-RW CED-8080B: Register
    > arbitration enabled
    > n. category bus drive writer name
    > 0. 2 1 1 yes LG CD-RW CED-8080B
    > i
    > r
    >
    > 18:07:47 #8 Text 0 File ThreadedTransferInterface.cpp, Line 754
    > Prepare recorder LG CD-RW CED-8080B for write in cue-sheet-DAO
    > DAO infos:
    > ==========
    > MCN:
    > TOCTYPE: 0x0 Close CD
    > Tracks 1 to 12:
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 0 352800 75351024
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 75351024 75703824 255410736
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 255410736 255763536
    310214688
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 310214688 310567488
    388740912
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 388740912 389093712
    468102096
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 468102096 468454896
    516188736
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 516188736 516541536
    584260320
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 584260320 584613120
    625272144
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 625272144 625624944
    674864064
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 674864064 675216864
    734595456
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 734595456 734948256
    768106752
    > TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 768106752 768459552
    799317792
    >
    > 18:07:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 622
    > Setup items (after recorder preparation)
    > 0: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 31887 (31887) = #31887
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    31887 blocks [LG CD-RW CED-8080B]
    > 1: TRM_AUDIO_NOPRE (yyy).mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 76406 (76406) = #76406
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    76406 blocks [LG CD-RW CED-8080B]
    > 2: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 23151 (23151) = #23151
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    23151 blocks [LG CD-RW CED-8080B]
    > 3: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 33237 (33237) = #33237
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    33237 blocks [LG CD-RW CED-8080B]
    > 4: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 33592 (33592) = #33592
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    33592 blocks [LG CD-RW CED-8080B]
    > 5: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 20295 (20295) = #20295
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    20295 blocks [LG CD-RW CED-8080B]
    > 6: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 28792 (28792) = #28792
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    28792 blocks [LG CD-RW CED-8080B]
    > 7: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 17287 (17287) = #17287
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    17287 blocks [LG CD-RW CED-8080B]
    > 8: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 20935 (20935) = #20935
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    20935 blocks [LG CD-RW CED-8080B]
    > 9: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 25246 (25246) = #25246
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    25246 blocks [LG CD-RW CED-8080B]
    > 10: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 14098 (14098) = #14098
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    14098 blocks [LG CD-RW CED-8080B]
    > 11: TRM_AUDIO_NOPRE (yyy.mp3)
    > 2 indices, index0 (150) not provided
    > original CD pos #0 + 13120 (13120) = #13120
    > relocatable, CD pos for caching/writing not required/not required, no
    patch infos
    > -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length
    13120 blocks [LG CD-RW CED-8080B]
    > --------------------------------------------------------------
    >
    > 18:07:47 #10 Phase 32 File dlgbrnst.cpp, Line 1147
    > Start der Simulation mit 8x (1200 KB/s)
    >
    > 18:07:47 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 0 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #0
    >
    > 18:07:47 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 1 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #32037
    >
    > 18:07:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 2 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #108593
    >
    > 18:07:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 3 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #131894
    >
    > 18:07:47 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 4 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #165281
    >
    > 18:07:47 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 5 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #199023
    >
    > 18:07:47 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 6 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #219468
    >
    > 18:07:47 #18 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 7 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #248410
    >
    > 18:07:47 #19 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 8 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #265847
    >
    > 18:07:47 #20 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 9 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #286932
    >
    > 18:07:47 #21 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 10 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #312328
    >
    > 18:07:47 #22 Text 0 File ThreadedTransferInterface.cpp, Line 1661
    > Verifying CD position of item 11 (relocatable, no CD pos, no patch infos,
    orig at #0): write at #326576
    >
    > 18:07:47 #23 Text 0 File BusArbiter.cpp, Line 821
    > Thu Nov 23 18:07:47 2000
    > READ: Register
    > arbitration enabled
    > n. category bus drive writer name
    > 0. 2 1 1 yes LG CD-RW CED-8080B
    > 1. 1 -1 -1 no READ
    > i i
    > r r
    >
    > 18:10:50 #24 SCSI -1114 File Cdrdrv.cpp, Line 1251
    > SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x028146F4
    > Status: 0x04 (0x01, SCSI_ERR)
    > HA-Status 0x00 (0x00, OK)
    > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    > Sense Key: 0x06 (KEY_UNIT_ATTENTION)
    > Sense Code: 0x29
    > Sense Qual: 0x00
    > CDB Data: 0xAA 0x00 0xFF 0xFF 0xD4 0x2B 0x00 0x00 0x02 0x76 0x00 0x00
    > Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
    > 0x00 0x00 0x00 0x00 0x29 0x00
    >
    > 18:10:50 #25 mmc 10496 File Writer.cpp, Line 248
    > Einschalten, Reset oder Bus-Reset aufgetreten
    >
    > 18:10:50 #26 Text 0 File ThreadedTransfer.cpp, Line 211
    > all writers idle, stopping conversion
    >
    > 18:10:51 #27 Text 0 File ThreadedTransfer.cpp, Line 205
    > conversion idle, stopping reader
    >
    > 18:10:51 #28 SCSI -1119 File Cdrdrv.cpp, Line 1093
    > SCSI Exec, HA 1, TA 1, LUN 0
    > Status: 0x04 (0x01, SCSI_ERR)
    > HA-Status 0x00 (0x00, OK)
    > TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    > Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    > Sense Code: 0x09
    > Sense Qual: 0x00
    > CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    > Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
    > 0x00 0x00 0x00 0x00 0x09 0x00
    >
    > 18:10:51 #29 Phase 34 File dlgbrnst.cpp, Line 1147
    > Simulation nicht erfolgreich mit 8x (1200 KB/s)
    >
    > 18:10:51 #30 Text 0 File Scsicmd.cpp, Line 260
    > SCSI not using temporary buffers
    >
    > 18:10:51 #31 Text 0 File Scsicmd.cpp, Line 283
    > 10 out of 10 temporary buffers allocated
    >
    > 18:10:51 #32 Text 0 File WinNeroThreads.cpp, Line 909
    > Thread priorities:
    > Pri. name -> class / level
    > 0. Idle -> 32 / -15 = default
    > 1. Background -> 32 / -2 = default
    > 2. Normal -> 32 / 0 = default
    > 3. HighIdle -> 128 / -1 = default
    > 4. High -> 128 / 0 = default
    > 5. Higher -> 128 / 1 = default
    > 6. Realtime -> 128 / 2 = default
    >
    >
    > Existing drivers:
    > File IoSubSysSCSI1HLP.VXD: Ver=4.90.3000, size=19278 bytes, created
    08.06.2000 17:00:00
    > File IoSubsysNEROCD95.VXD: Ver=4, 0, 0, 8, size=30887 bytes, created
    25.04.2000 16:52:56
    > File PTUDF.VXD: Ver=Version 1.3.152, size=67731 bytes, created
    14.03.2000 20:08:54
    > File IoSubsysPTUDFDR.VXD: Ver=1.3.152, size=37533 bytes, created
    14.03.2000 20:09:46
    > File PTUDFAPP.EXE: Ver=1, 3, 0, 152, size=266240 bytes, created
    14.03.2000 23:40:32
    > File IoSubsysCDFS.VXD: Ver=4.90.3000, size=59141 bytes, created
    08.06.2000 17:00:00
    >

    Bonjour !!!
    Problem: Nero 5 brennt keine MP3s mehr...
    Lösung: Hmmm! Da kann ich nichts genaues zu sagen, warum du keine MP3s
    brennen kannst.
    Ich jedenfalls, weil ich gearde das Geld für andere Dinge brauche, habe noch
    den Easy CD
    Creator 3.5 der bekanntlich noch nichts mit MP3s anzufangen weiß und
    deswegen, es ist
    sicherlich etwas umständlich und sowieso zeitaufwändig, decodiere ich meine
    MP3s zu
    WAVs und brenne sie dann. ...nicht die beste Lösung aber wenn es dringend
    kommt funzt
    es ja. Gute Decodierer ist übrigens MPEG Suite 1.2 und gibts hier:
    http://mp3encoder1.purespace.de/MPEG-Suite-1-2.zip
    kleinpaulchen !!!