Beiträge von alfa164

    Sevus,


    versuch doch bitte einmal die entsprechenden Dateien mal in ein Tmp Verzeichnis zu kopieren und mit den kopierten Dateien zu experimentieren:
    Umwandel/umbenennen in .rtf und .txt und dann mal schauen was für Formatverluste auftreten? Vielleicht sind die vertretbar?
    Hast Du vielleicht einen Link in der def. Datei, die auf eine z.B. Excelliste verweist die verschoben/umbenannt wurde?
    Ciao

    Man, das wird ja richtig DOS förmig. Na egal. Also, noch ein link:


    http://freepctech.com/pc/002/files010.shtml


    Bischen runterblättern und dann findest Du folgendes:

    . . . .Download 913k
    Disk contents: attrib.exe, deltree.exe, doskey.exe, edit.com, emm386.exe, extract.exe, fdisk.exe, format.com, himem.sys, mem.exe, more.com, mouse.com, move.exe, mscdex.exe, reboot.com, scandisk.exe, scanreg.exe, smartdrv.exe, sys.com and xcopy.exe as well as a generic IDE CDROM driver.


    Nach dem Speichern die .exe starten und eine Floppy bereithalten. Der formartiert erst und kopiert Dir die obigen files auf die Floppy. So nun kannst Du Deine sys.com kopieren.
    Vielleicht klappts jetzt.
    Ciao


    ps auf der homepage sind noch andere XP Downlaods
    [/u]

    Na, dann hab ich noch einen Versuch,


    wieder etwas gefunden unter diesem link:
    http://www.webopedia.com/TERM/N/NTLDR.html


    Often a user will see the message "NTLDR is Missing" after attempting to install Windows 2000 or Windows XP, or upgrade a Windows 95-based or Windows 98-based computer to Windows 2000 or Windows XP. The message appears after the first reboot. This occurs only if Windows 95 or 98 has been installed on a drive with the FAT32 file system.


    To correct the problem, the user must boot the computer with a Windows 95 or 98 Startup diskette or another bootable diskette with sys.com on it. Then, at the "A:\>" prompt, type "sys c:" and press "enter." A "System Transferred" prompt should appear and then the user must reboot the computer without the diskette.
    Hoffung nicht aufgeben. Wird schon irgendwie gehen.
    Ciao

    Servus,
    ich selbst bin kein Spezialist. Habe gerade im Netz noch weitere Vorgehensweisen gefunden. Ich setze mal XP bei Dir voraus!
    Vielleicht geht das mit dieser Methode von folgendem link:
    http://www.computerhope.com/issues/ch000465.htm
    Windows XP users


    1. Insert the Windows XP bootable CD into the computer.
    2. When prompted to press any key to boot from the CD, press any key.
    3. Once in the Windows XP setup menu press the "R" key to repair Windows.
    4. Log into your Windows installation by pressing the "1" key and pressing enter.
    5. You will then be prompted for your administrator password, enter that password.
    6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter "E". This letter may be different on your computer.


    copy e:\i386\ntldr c:\
    copy e:\i386\ntdetect.com c:\


    7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.
    Also, so wie ich das verstehe, müssen die ntldr und ntdetect.com jeweils direkt zum Laufwerk C: kopiert werden
    Der Befehll zum Kopieren steht oben (copy e: . . . . . . .)
    Viel Erfolg.
    Ciao

    Servus,


    ich habe folgendes Problem mit Word aus Office 2003:


    Wenn ich in Word etwas zeichnen will, egal was, dann kann ich diese Funktion nicht ausführen... Also ich will z.B. eine Linie in Word zeichnen. Dann klicke ich auf die Linie und kurz darauf (1 Sekunde) verschwindet die Möglichkeit eine Linie zu zeichnen und der Cursor blinkt wie vorher vor sich hin für eine Texteingabe..
    Auch gilt das für „Format übertragen“ durch das Symbol mit dem Pinsel


    Eine Neu-Installation von Word und vom gesamten Office Paket haben nichts genützt..


    Wer weiß Rat?